togrady
Mar 21, 2010, 03:25 PM
I have a Lennox elite series furnace. The vents are just blow out cold air, not heat.
The theromstat is now working strange.
I set the digital theromstat at 75 deg. And then place the thermostat on hold.
The temp. emediately goes to 65 deg. I went into the attic and looked at the system.
I read the directions. I followed the directions; turn gas to off position, turn themostat to low,
Turn electricity off to the unit, let sit for 5 minutes to clear, turn gas to on position, turn electricity
On. The system still blows cold air, not heat? The thermostat is stll going from 75 deg. To 65 deg.
I went back into the attic to review.. I looked through the plastic circular view glass. I noticed 2 green lights. The green light on the right is on, the green light on the left is blinking. Is this an indication that something is wrong. If so, what can I do the remedy the problem?
The theromstat is now working strange.
I set the digital theromstat at 75 deg. And then place the thermostat on hold.
The temp. emediately goes to 65 deg. I went into the attic and looked at the system.
I read the directions. I followed the directions; turn gas to off position, turn themostat to low,
Turn electricity off to the unit, let sit for 5 minutes to clear, turn gas to on position, turn electricity
On. The system still blows cold air, not heat? The thermostat is stll going from 75 deg. To 65 deg.
I went back into the attic to review.. I looked through the plastic circular view glass. I noticed 2 green lights. The green light on the right is on, the green light on the left is blinking. Is this an indication that something is wrong. If so, what can I do the remedy the problem?