PDA

View Full Version : 2 shower heads, one with no hot water


Eagle Feather
Feb 23, 2010, 06:05 PM
Hi,
I have dual shower heads but one only has cold water. It is a handle, lever type and when I turn it to the left for hot water it doesn't get hot and if I turn it all the way the pressure stops and no water at all. Any thoughts?
Thanks,
Eagle Feather (Tyler)

Milo Dolezal
Feb 23, 2010, 07:22 PM
It is most likely caused by debris lodged in cold water side inlet/outlet in the cartridge. You will have to close water, remove trim, remove cartridge, flush it / clean it - and reinstall. It should work now... Back to you...

ballengerb1
Feb 23, 2010, 09:18 PM
Milo got you started in the right direction. However, since you never get hot check both inlets, hot and cold. With the cartridge removed cover the opening with a towel and have someone turn on the main for a moment to blow out the lines