Engine turns - no start - no spark - ran line from battery to Distributer - starts and runs great. Checked voltage at distributer - showed 11.5 volts - when line was ran direct from battery - was 12 volts. Engine is 3.0 V-8. New plugs, New spark plug wires, new distributer, new coil, and new ign module.

Thanks

. Check all under dash and under hood fuses with a test light or multimeter:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-3.html#post252145

. Check ignition switch for wear, pitting, or melting.

Ignition switch has been replaced - before your comment txGreaseMonkey - any other ideas?