Have a 1993 V6 3.0 Camry, has spark and compression but won't start. Can you help please, anyone?

This link from the Sticky may help:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-11.html#post2123675

How should the markings on the crankshaft and camshaft be positioned? Car won't start. Help!

How should the markings on the crankshaft and camshaft be positioned? Car won't start. Help!

93 camry v6 3.0 has everything but doesn't start, help please! I also need to know where the crankshaft and or camshaft positioner needs to be at. Thank you!

Are you attempting to do the timing belt yourself?
I have the manual in front of me and can attach a file, but first would like to know how it stopped running.
Was it just going out to start one morning, or while driving? Any history of repairs? Was a t-belt just recently done somewhere?
The more info you can give, the better.

Car was running just fine, until we replace the timing belt, water pump, oil pan gasket, camshaft and crankshaft seals... Now the car won't start. Its not the battery either. Help!

After we complete the job, the car started just fine with only one turn of the key. Then 2 seconds later died, help...

Looks like you need to go back in and look for what was done wrong. Which something obviously was because it was running fine before.
If the tensioner was pushed back to quickly, it could have been damaged and now it's too weak causing the belt to slip several teeth. With the timing marks off, it'll never start.
The cam pulleys also need to be placed correctly. If they were swapped accidentally, then the belt could have walked off.
I've attempted to attach a file but it's too large for this site so supply your email address and I will send it to you.
It will show how the marks should be lined up and pay close attn to the tensioner check.

My email address: [email protected], now the car starts but doesn't stay on?

sbthao, did you get it?

Yes got it, thank you... Still nothing