I have a whirlpool washing machine and all of a sudden the rinse cycle will not work when it gets to the rinse cycle there is just a low buzzing sound but all of the other cycles will work. Please

Can you post the exact model #, please


Also check the lid switch.

Model #LSQ9010KQO ser.# CM0330289

can you post the exact model #, please


Also check the lid switch.

MODEL# LSQ9010KQ0 ser.# CM0330289 THANK YOU.

I'm still leaning towards a bad door switch, do you own a volt/ohm meter? Could you put a jumper in?

I'm still leaning towards a bad door switch, do you own a volt/ohm meter? could you put a jumper in?

Thank you so much. That was the problem the switch, I eliminate the switch and it worked.

Hey no problem, Thanks for letting me know the outcome. The switch is cheap and easy to replace. Here's a link The Virtual Repairman's Appliance Help :: View topic - How to Replace the Lid Switch on Kenmore/Whirlpool washers (http://www.repair2000.com/forum/viewtopic.php?t=1882&highlight=lid+switch+whirlpool)

You can order the part here also.