I have a 1996 honda accord. The clutch pedal has been getting little resistance /pressure for a while and now its going straight to the floor and not building any pressure when I bleed it. I just bought the slave cylinder and need someone 2 take me step by step through the replacement process.

How 2 replace slave cylinder on 1996 honda accord

This write up should help:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-2.html#post232189

Any amount of air in the system will cause the pedal to go to the floor. It can be a real problem, once that happens. A power bleeder would be ideal. I use the fool-proof Brake Bleeder Economy One-Man, Cal-Van Tools, No. 247, brake bleeder. It cost $2.99 and has a one-way check valve.