My previous question I left out I am trying to install a new ceiling fan , has white, blue , black, going to pre wired outlet in new house has red, black, and white , how does this match up or wire up , ceiling fan also has a ground.

Do you have 2 wall switches by the door? If so, most likely you have 2 circuits--black/white and red/white. One circuit controls the fan and the other circuit controls the light.

If you have a voltage tester, I'd do the following:

Check voltage between black and white
Have assistant flip one wall switch -- see if voltage changes
Have assistant flip the second switch -- see if voltage changes
Check voltage between red and white
Have assistant flip one wall switch -- see if voltage changes
Have assistant flip the second switch -- see if voltage changes

What I would expect is that one switch will have an effect on one pair of wires and the other switch will have an effect on the other pair. If this is the case, then you can hook up the fan as so (after killing the power):

Ceiling white to Fan white
Ceiling black to Fan black
Ceiling red to Fan blue


If you're anal-retentive like me and want the other switch to control the light, just switch the black and blue fan wires.

Note: if the voltage test does not behave as expected, I'd NOT hook this up until more investigation is done.

Hope this helps,
WallyH

Black - black
White - white
Blue - red

Ceiling Fan Wiring, Ceiling Fan Wiring Technical Help, Do it Yourself (DIY) - Ceiling Fans N More (http://www.ceiling-fans-n-more.com/ceiling-fan-wiring.php)