Not sure how old pump is but this would be the 2nd time I replaced the switch on this pump after losing power and water to it . At first it did work for awhile but dept clicking clickin clickin. Water pressure wasn't very good anyway. Not much money frustrated.

Hi! jdrew39, welcome to AMHD :)

Is it a submersible or in the basement?

Have you checked for prime?
How to prime a water pump to restore lost water pressure (http://www.inspectapedia.com/water/Prime_The_Well.htm)

This site will help for the clicking:
How to diagnose water pump short cycling and how to restore lost air in a building water pressure tank - private pump and well system do-it-yourself repairs (http://www.inspectapedia.com/water/watertank.htm)

How to adjust water pump pressure, pump cut-on pressure and pump cut-off pressure - private pump and well system do-it-yourself repairs (http://www.inspectapedia.com/water/WaterPumpAdjust.htm)

Check the left side menu for other solutions.

K

Why did you replace the switch? Was the old one doing the same thing as this one?

You would want to check for a waterlogged tank. Do do that, simply depress the air valve at the top of the tank for a few seconds. If water comes out, then that is bad.

KU gave you some good links. Get back with us.