I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would be appreciated.

Hi! dasses, welcome to AMHD :)


I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would be appreciated.

:cool: Kudos to hvac1000 ;)

See here post #6 link to pdf:
docs.hvacpartners.pdf (https://www.askmehelpdesk.com/heating-air-conditioning/bryant-plus-80-code-33-a-266589.html)

I did not check for your problem. It may be on a different page.

k

Edit:
Everywhere I looked, there are no references to a 5 then 5 error code.
The codes, and how to read them should be on a sticker inside the front panel.