2000 Jeep Wrangler, 4 Cyl. It just died going down the road. I replaced the crank shaft sensor. It's getting gas at the fuel rail and I tested the spark with pulling the plug wire and putting an old plug in and laying on top of engine, it's getting spark. When the engine turns over it does not even sound like it wants to start! HELP!!

. Test all under hood and under dash fuses with a test light or multimeter:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-3.html#post252145

. Check for codes.

. Remove any aftermarket ignition system components, if any.

If the problem persists, have the ECM tested.