We have a Heil 7000 propane furnace. We had it installed in 1993 and haven't used it much over the years. This year when we started using it the motor had froze up and we replaced that part. Draft/flue inducer. I think is what it was called.Anyway after we reinstalled the part now the ignitors aren't working. Everything worked before we took off the part and we can't find the owners manual.. The model number is nulk100dh07. Thank you for any help

Well now you have a service manual both part one and two. Follow the instructions to find out why the ignitor will not work to start with. This is a complete set of factory service manuals. I suggest you keep a copy on your computer for future reference for your or a repair persons use.

Part one

http://icpindexing.mqgroup.com/documents/086477/NUGK%20SERVICE%20MANUAL%20%20PART%201.pdf

Part two

http://icpindexing.mqgroup.com/documents/086477/NUGK%20SERVICE%20MANUAL%20PART%202.pdf

Thank you I have been searching everywhere.. I just wish spring would come

Spring always comes but most of the time not fast enough.