my wires are BLUE-x,YELLOW-y1,RED-r,GREEN-g,ORANGE-o,WHITE-w1,BROWN-w2, where to wire these wires to a RTH3100c

It seems you lost or misplaced your manual so here it is. The manual can explain better than I can when it comes to the wiring. I am also posting a operating manual so after you get it wired you can set it up properly.

http://customer.honeywell.com/techlit/pdf/PackedLit/69-1889EF.pdf


http://customer.honeywell.com/techlit/pdf/PackedLit/69-2339EFS.pdf

Wired it up it won't do anything.

Where does it jump from aux to y or aux to e

blue-x yellow-y1 red-r green-g orange-o white-w1 brown-w2 I know where the red ,green, orange go but the y-1 w1 w2 and x are the problem and where should it jump.