View Full Version : Noise in pipes at the start of a flush
rappa
Nov 29, 2009, 08:08 PM
Still having a problem with noisy toilet. Had fill valve replaced and flapper? Now every time we flush the toilet it makes a loud banging/vibrating noise in the pipes, but this only happens at the very beginning of the flush. Only at the start and not every time. When the toilet is flushed within a few minutes of the last flush this does not occur but, When it has been a while between flushes that's when it makes the most noise... need help... very frustrating
hkstroud
Nov 29, 2009, 08:47 PM
Loose washer in stop valve. Replace stop valve.
ballengerb1
Nov 30, 2009, 08:25 AM
So this is an ongoing problem even before you installed the new flush valve, right? Tell us about the earlier problem before the valve swap. This may be water hammer.
rappa
Nov 30, 2009, 11:10 AM
No, this is not an ongoing problem b/4 installing the new flush valve. Had absolutely no problems, no noise before replacing flush valve and flapper. All the problems started as soon as we changed the valve and flapper.
ballengerb1
Nov 30, 2009, 02:29 PM
Your first sentence "still having a problem with noisy toilet. Had fill valve replaced and flapper" would lead us to believe the problem was there before you did the swap. No matter, when does the noise happen, exactly when the float shuts off the water to the tank or when?
rappa
Dec 8, 2009, 09:11 PM
The noise happens at the very beginning (only) of the flush. There's like a vibrating noise in the pipes. Driving me crazy. This problem was never there before. The noise started when we replaced the flush valve and the flapper. The initial problem was the flush valve.
afaroo
Dec 8, 2009, 11:36 PM
Hello Rappa,
Please see the images below and tell us which fill valve do you have, Thanks.
John
rappa
Dec 15, 2009, 04:26 PM
Hello afaroo,
It looks like I have the fill valve on the left. It was just replaced, and the new one looks like the one on the left.
rappa
Dec 15, 2009, 04:27 PM
I forgot to add, it's a fluidmaster.