Hello, I'm having problems with my 98 Venture's turn signals/hazards and wipers.
The signal and flashers will periodically stop working for awhile, then start again after the car is turned off. The wipers only operate in the 'fast' setting. Could these all be interconnected because of the controls being on the turn signal arm?
Thanks for any feedback!

Bob
Skokie, IL

Yes. Disconnect the negative battery cable and try taking apart and cleaning the Multi-Function Switch. Dirt and oil from your fingers can cause problems. If the problem persists, replace the switch. Not a difficult job.

You can also try spraying the switch with WD-40.