View Full Version : How to connect two computers
aenpc
Nov 5, 2009, 12:44 PM
Hi
How to connect two computers for tranfer files togther with wireless connection .
Curlyben
Nov 5, 2009, 12:54 PM
Better to use the KISS method.
Grab yourself a flash drive and transfer them that way.
Flash drives are extremely inexpensive and simple to use.
aenpc
Nov 5, 2009, 01:38 PM
Thanks for answer .
I use this way when transfer small data
But now I want tranfering 15 g.b
Curlyben
Nov 5, 2009, 01:46 PM
Simple enough as Flash drives currently run up to 256 Gb although those cost a bomb.
retsoksirhc
Nov 5, 2009, 02:09 PM
Well. I'm not going to do all the work for you (since it's pretty easy to find this info on the web... google is your friend), but I will point you in the right direction. What you're trying to do is called Ad-Hoc wireless networking, and it's not too complicated if you don't mind changing network settings. Give it a search, and you should find some decent instructions there.
aenpc
Nov 5, 2009, 06:21 PM
Thank for all
Yes ; ad-hoc called temporary network it's design to tranfer date between computers maximum range 33 feet .
And now , I show how to configration two computers wireless to use temporary network use wireless with out access point to do that just two computers have network wireless
Start ------
Right click on icon wireless then select network & sharing center
Then left side from windwos click on
Set up a conncetion or network
Choose set up wireless ad hoc (computer-to-computer) network
Click next & type network name
Type any name you want
Select security type...
Now you finsh computer number one
Then go to computer two & config the same config you do it in the computer one .
Finally
Close windows
You must now see the are wireless network avalible click connect & choose the network you created .