I have a epson stylus cx3200 and it will scan onto my computer but when I print it only comes out blank... I put brand new cartriges in and everything... please help...

Chasity,

Let's begin by disconnecting the printer cable to the PC. Then print the stand-alone test pages.

If that works, then re-connect the printer to the PC. Open the print driver and print a test page. If the printer works then your problem is from within the application.

You will need to go through the page setup and print options from within the application.

Chasity,

Let's begin by disconnecting the printer cable to the PC. Then print the stand-alone test pages.

If that works, then re-connect the printer to the PC. Open the print driver and print a test page. If the printer works then your problem is from within the application.

You will need to go through the page setup and print options from within the application.

I don't know hoe to run a test page and it seems like the ink doesn't want to go onto the paper because it scans and copies and prints it just doesn't show anything on the paper