PDA

View Full Version : Icm ground location?


sailor24
Oct 21, 2009, 05:47 PM
Hi
I just chenged my icm with a new one. I thought problem solved. Wrong. I had
Again with start problem. It seemed like I don't have spark on all clinders. Same as it happened before I replace icm.

This time I bought whole distributor with new icm again. Starts again.
I know I got to check grounds. Smb went through this same and it happened to be ground by icm after 150 in drain. I don't have tha kind of money. I'm ussing my "karma chips" with auto parts store.
An help appreaciated.

TxGreaseMonkey
Oct 21, 2009, 05:59 PM
Did you install a new coil?

sailor24
Oct 21, 2009, 06:22 PM
Yes I did but only this time with new distributor lets see.

sailor24
Oct 21, 2009, 06:24 PM
And I installed new coil with the 1st new icm no spark!
Lets see

sailor24
Oct 21, 2009, 06:27 PM
I don't want to interchange icm to new distro to see if 1st new icm failed on me, although I'm considering as option.

TxGreaseMonkey
Oct 21, 2009, 06:39 PM
More than half of all new aftermarket distributors for Hondas have not worked on this site.. I only recommend genuine Honda distributor housings--aftermarket ICMs and coils have been fine.