Trying to install a glacier bay faucet with sprayer and the connector is too short because we had to put extenders between base cabinet and countertop, therefore leaving the hose connector too short to fasten underneath sink. Tried Home Depot to see if there was a longer piece for sprayer to go through sink and counter, but no luck. Any suggestions?

I am not sure if you can not connect the spray hose or you can't connect the piece that the spray hose goes through.

If the hose it too short try connecting the hose before you put the faucett all the way onto the faucet. If it is the thing that the spray hose goes through use some silocone under the flange and stick it to the cabinet.

Let me know because I am not clear.

The piece that the hose goes through is too short because there is a separation between the sink hole and the hole in the countertop due to adjustment made because countertop was too low for drawers to open. The hose is long enough, but the piece that it goes through is too short.

Can you post a pic using "go advanced/manage attachments". Post a pic of the area and the threads of the hose.

I'm thinking along two lines:

1. relocate with say copper tubing.
2. Splice hose with compression couplings and hose adapters. Support the fitting separately.