krz
Oct 2, 2009, 02:41 PM
First off I'd like to say Hello. I've been reading around these forums for awhile now and decided to stop lurking and actually ask a question. I have searched the forum and found one answer that was close to my question (https://www.askmehelpdesk.com/plumbing/peerless-kitchen-faucet-low-pressure-19142.html). The solution didn't work for me though. My problem is generally the same. My sprayer has full pressure, I have cleaned the aerator, actually not only have I cleaned it, I have taken the whole spout off and even turned the water on without the spout on. If I turn the water on very low it is fine, but can't really wash anything like that. If I turn it up a little bit at a time, hot or cold, it eventually starts to just drip out and lose all pressure. When I took the spout off I turned it on full blast with a towel there to clean up any water that may have shot out. However it just dribbled out. When I picked up the hose it went full force. I would assume that it is a problem with the diverter but I can't seem to get it out. I've tried with a coin and it almost feels as if it's going to break the plastic. Does anyone have any ideas if it is indeed the diverter or something else to try? Here is a picture of what I am talking about, even though it's probably not needed lol. http://www.tkrz.net/sink.jpg