View Full Version : Noisy pipes after flushing newley fixed toilet
 
 ktca
Sep 12, 2009, 08:15 AM
We have a toilet that had a leaky seal.  Six months later we fixed it, but now the pipes make a banging noise.  What should we do.
 cyberheater
Sep 12, 2009, 08:23 AM
First, make sure that the toilet supply valve is fully turned on to see if that helps the banging pipe problem.
 ballengerb1
Sep 12, 2009, 08:38 AM
Repairing a bad wax ring should not cause this, likely a coincidence. Put you hand on the supply pipe and flush the toilet. Could you "feel" the bang in your fingers?
 speedball1
Sep 12, 2009, 08:46 AM
We have a toilet that had a leaky seal.  Six months later we fixed it, but now the pipes make a banging noise.  What should we do.
 
What pipes make a banging noise?   The drainage when you flush or the supply pipes as you fill?  Tom
 ktca
Sep 12, 2009, 02:48 PM
First, make sure that the toilet supply valve is fully turned on to see if that helps the banging pipe problem.
 
:)  Now I feel silly!  The valve was not open all the way!   THANK YOU!!
 mygirlsdad77
Sep 12, 2009, 03:07 PM
If they had no hammer noise before, then shut off valve would be a likely suspect, good job.
 
 
Just a spell check on my rating of cyber
 cyberheater
Sep 18, 2009, 04:10 AM
ktca, you are most welcome. Common mistake - it happens.