View Full Version : Repair riding lawn mower
beverly a
Sep 8, 2009, 01:57 PM
How do I change the blade engage cable on a 42 inch troy built riding lawn mower #6605 model.. Thank you. Beverly a:)
ballengerb1
Sep 8, 2009, 02:29 PM
Blade cable, do you mean the belt?
beverly a
Sep 8, 2009, 05:16 PM
Blade cable, do you mean the belt??
It is a cable to the PTO lever used in order to make the blades turn. I had a broken cable a month ago and had a new cable installed. Now the cable has broke again. I think I can replace the cable myself. I looked underneath and found the broken cable and I think I see how it is installed to the PTO lever.
If you have any suggestions I would appreciate it. Mower is a 42 inch Troy Built Super Bronco.
Thank you again.
Beverly A
crigby
Sep 8, 2009, 08:34 PM
Hi,
Cable should be a 746-04092 and it has hairpin cotters at both ends. If it failed that quickly, something else is wrong or not quite right.
Peace,
Clarke
beverly a
Sep 9, 2009, 05:25 AM
Hi,
Cable should be a 746-04092 and it has hairpin cotters at both ends. If it failed that quickly, something else is wrong or not quite right.
Peace,
Clarke
Thanks for the information. I also found that same part number in my manuel. I think I should be able to replace it. I did hit a log with the mower about two weeks ago, maybe that cause the cable to weaken. Thanks again. Beverly A:)