GotALeak
Oct 26, 2006, 11:12 AM
Hi,
Even when the knob is pushed all the way in, I have a slow drip coming from the lower spout (not the shower head). The normal knob operation is as follows: Pull for on, push to shut off, turn left for hot, turn right for cold. I removed the knob, then the circular brass plate, but I can't see any adjustments to make or washers to change. There is a clip that seems to secure the mechanics behind the knob but nothing slides out when I remove the clip. Any help you can give me before I proceed, will be greatly appreciated.
Thanks,
D
Even when the knob is pushed all the way in, I have a slow drip coming from the lower spout (not the shower head). The normal knob operation is as follows: Pull for on, push to shut off, turn left for hot, turn right for cold. I removed the knob, then the circular brass plate, but I can't see any adjustments to make or washers to change. There is a clip that seems to secure the mechanics behind the knob but nothing slides out when I remove the clip. Any help you can give me before I proceed, will be greatly appreciated.
Thanks,
D