Help! I am usually pretty handy but I can not figure out how to intall this tub spout kit!!

Help! I am usually pretty handy but I can not figure out how to intall this tub spout kit!!!

And what spout are we talking about? (see images) Tom

Hello Keriehall,

Please respond to Tom, and also see the images below it is the same is Tom's but show some more type, if you not sure please post a picture, and some one will help, Thanks.

John

I have the type depicted in figure #3

Hello Adam,

Almost 3 years old thread, always check the date on the left top corner.

#3 is a nose threaded spout what is your question?

Thanks.

John

I know it is an old thread. It is the only thing I could find related to my problem. I'll start a new one next time. Question: how do I remove the old gate and install the new one?

Just replace the spout it is easy and cheap, Thanks.

John

I know it is an old thread. It is the only thing I could find related to my problem. I'll start a new one next time. Question: how do I remove the old gate and install the new one?

The spout you have chosen is a spout with a female thread in the nose. You may remove it by unthreading it counter clockwise. Good lick, Tom