View Full Version : Craftsman Riding Lawnmower won't start
SandyWhite
Aug 17, 2009, 05:58 PM
We replaced the battery on the lawnmower and it still won't start. There is a click when we turn the key but that is it. We ran a jumper cable from starter to battery but then nothing. When we removed the jumper, click but not start. Any suggestions?:confused:
crigby
Aug 17, 2009, 06:12 PM
Hi,
The click should be from the solenoid, but since you tried to jump directly to the starter, and assuming you did this from the "+" side of the battery; you are describing a bad ground. I personally think your description may not be inclusive enough, or provide enough accurate info, but that is the conclusion to your description. Check to see if the battery terminals are clean and tight, and the engine mount bolts are tight.
Peace,
Clarke
SandyWhite
Aug 26, 2009, 06:38 PM
Hi,
The click should be from the solenoid, but since you tried to jump directly to the starter, and assuming you did this from the "+" side of the battery; you are describing a bad ground. I personally think your description may not be inclusive enough, or provide enough accurate info, but that is the conclusion to your description. Check to see if the battery terminals are clean and tight, and the engine mount bolts are tight.
Peace,
Clarke
Thanks Clarke! We replaced the solenoid and we just needed to jump the battery. Hopefully this has fixed the problem. I appreciate your help!