PDA

View Full Version : John Deere L110 drive won't engage after pushing in free wheel rod


moe3rd
Aug 17, 2009, 05:07 PM
I have a John Deere L110 when I push the free wheel rod in, it does not engage the drive. I can press the forward or reverse pedals and the rear wheels do nothing.

crigby
Aug 17, 2009, 06:07 PM
Hi,
Assuming you have not had a rear wheel off, then look in by the right rear wheel to see if the belt is on the transmission sheave. The bolt that hold on the belt guide is also on that side. If that is not it, check idlers and park brake release.
Peace,
Clarke