View Full Version : Rotten facial trim board
Oneill474
Aug 16, 2009, 08:38 AM
There is a 6"wide trim board is rotten. But only six inches is bad, the rest is okay.
The problem is cutting the rotten piece out. Part of the trim wood fits under a metal covering. A circular saw will not work. I have a reciprocal saw too but that vibrates a lot.
Do that have a narrow saw, that can get under the metal??
Stratmando
Aug 16, 2009, 08:41 AM
I have the same problem, A Multimaster type tool could work great, Rockwell emailed me an offer for theirs at about $110.
Pry wood out a little to expose nail if possible, and cut flush.
Here's one:
http://www.tylertool.com/rk5100k.html?gclid=CO31wazCqJwCFQkIswod_GvpFw
I wonder if it will reach to all of the nails. May have to cut down wood close to the metal, maybe rip boad down, then the reach could be increased.
ballengerb1
Aug 16, 2009, 10:44 AM
I would suugest that same tool. Dreml makes a version, some have variable speens. Fein also makes them but a complete set up can run $399. That metal is likely your drip edge is can be pried up and hammered back in place.
21boat
Aug 16, 2009, 01:35 PM
If you have a Harbor Freight store go there to get the tool. $40.00 with blades
I bought a couple for the guys trucks Works well for us.
- Harbor Freight Tools - Quality Tools at the Lowest Prices (http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=65700)
ballengerb1
Aug 16, 2009, 04:22 PM
21 let me know how long/well they work. I have not had good experiences with HF
21boat
Aug 16, 2009, 06:50 PM
No problem Bal. I basically do the numbers on tools being keepers or throw aways. When I started I went to the rental company's I already knew and talked with them to find out what tool line they rented and held up. I figured they are the bean counters of cost/lasting/replacement.
I buy a lot of half and half. So far the harbor freight tool is panning out
Here is the most interesting tool study I ever did. I had a brick pointing job grinding All the joints out. Building was 70' high and 175' long .
The grinders I started with was
Milwaukee
Bosch
Dewalt.
The New Dewalt heavy duty grinder only lasted 2 days. I got a replacement and that lasted 5 hrs. It was still smoking when I took it back to HD. By chance A Dewalt rep was there that day and said there's a home owners Dewlat called Quantum Pro and its not in HD. He also took my grinder and was going to have his people look at it. . HD. Didn't carry it and said check Kmart. I bought two they were cheap.
Believe it or not they lasted through half the job. I went to get more and they stopped caring them. Shucks... Never saw them since
Oneill474
Aug 18, 2009, 04:06 PM
Used a small 12"compass saw. Drip a small hole first
ballengerb1
Aug 18, 2009, 07:27 PM
21, I hear you. I could buy from them for a once in a year specialty tool not used often, like my Dreml Multimaster. Only used it twice in 6 months and probably could have gone HF. For my drill/driver I got to got higher like Makita or Bosch.
logan176
Aug 19, 2009, 08:42 PM
I bought the Dremel MultiMaster when I was installing hardwood floors in my house. I used it to cut the door jambs and it worked great! I have used it many times since then... it truly is a handy tool.
Last month I used it to cut out a 1-foot piece of 1x4 fascia board on my garage that was rotten. I gently removed the drip edge, used a speed square to get a straight line and whipped out the Multimaster. I got a perfectly straight cut in about a minute. The tool was certainly worth the $100 I spent at Lowe's.
21boat
Aug 19, 2009, 09:15 PM
Hi bal. It would be hard to list all the tools I bought at HF.
My standard HF shopping.
Hose repair coupl
Lime safety vest
Knee pads
Air chucks/quic coup.
Ear protectors
Work gloves
Safety glass's ( bigge)
Funnels
Lots of shovels My guys run over then with dumps or loader Lean shovel againist truck move truck.
Etc.
Their chainsaw blade sharpener worked wonderfully, so did their $19 bat drill. A coil roofing nailer.
The best tool I ever had was one that blew out and I lay that on a porch stoop while working downtown inside a re hap and we take bets on how long it will sit there before its stolen. Never had one last a day yet.. I had a tire that I found a free sign on in a yard and thought it would fit my daughters car and no go. Last week I left it by some garages I own and it was gone the next day. Just trying to keep the system going. Now if I can get my garbage bag to do that Id save...