nzpyjx
Jul 31, 2009, 04:06 PM
Whirlpool washer, Model GSX9885JQ0, approximately 8-10 yrs. Old, direct drive.
I replaced the water inlet valve and I thought it went through the first time I ran the washer but the second time it would not fill with water for the final rinse cycle only.It filled and rinsed and drained until the final phase.
What could be wrong?
I replaced the water inlet valve and I thought it went through the first time I ran the washer but the second time it would not fill with water for the final rinse cycle only.It filled and rinsed and drained until the final phase.
What could be wrong?