PDA

View Full Version : Drive belt for a 48inch John Deer riding mower


lippincot
Jul 21, 2009, 01:04 PM
Do I need to change the drive belt from the transmission to the engine its very loose and the mower barely moves forward or backwards, need to see a diagram if available to see if it came off track

crigby
Jul 21, 2009, 02:52 PM
Hi,
I have the frawings for most, but I need to know the model to post the correct one. Just the decal on the hood will suffice.
Peace,
Clarke

lippincot
Jul 21, 2009, 02:59 PM
Hi,
I have the frawings for most, but I need to know the model to post the correct one. Just the decal on the hood will suffice.
Peace,
Clarke

I don't know the model number It's a 48 inch rider 2006 model John Deere

crigby
Jul 21, 2009, 05:22 PM
Hi,
Well, in 2006 Deere made the LA series, the X300 series, X500 series and the X700 series. The first three are in play here and have radically different belt routings. The serial number on the first is under the left rear wheel fender, and under the right hand heat shield on the frame just behind the right front wheel on the other two.
Peace,
Clarke

lippincot
Jul 22, 2009, 06:33 AM
Hi,
Well, in 2006 Deere made the LA series, the X300 series, X500 series and the X700 series. The first three are in play here and have radically different belt routings. The serial number on the first is under the left rear wheel fender, and under the right hand heat shield on the frame just behind the right front wheel on the other two.
Peace,
Clarke

It sys 100 series on the dash, and LA130 Automatic above the front tires

crigby
Jul 22, 2009, 02:38 PM
Hi,
Okay, here you go.
Peace,
Clarke