I'm having a Tough time finding a 50', and a 25 foot Power cord for a Generator.
Generator Has 50 Amp 4 Prong Twist lock, and the Power inlet has 3 prong twist lock with the center pin(California Style). Any Ideas, Local suppliers cannot find.
Also have a tough time finding a Square D QOT 3030 Breaker(2 pole tandem 30)
Thanks for any responses.

A used breaker: QOT23030 Square D - All Breakers, Inc. (http://www.allbreakers.com/Circuit-Breakers/Square-D/QOT/QOT23030-spc-jonrkqgpcqqpe.html)

This is why you can't find one: http://www.squared.com/us/misc/faqInternet.nsf/2a7a2a67c5b079a085256a9900703521/e3913b0c89b9fbcc85256c1b0062f1d4?OpenDocument&Highlight=0,QOT2020

I have this "search knack".

What's the NEMA designations for the genset cords.

Will these work?

The CS6364 connector has the center pin. See the user manual and Google the connector designation.

Will these work?

The CS6364 connector has the center pin. See the user manual and Google the connector designation.

I'm a search Maniac Myself, I had called Square D, and they say it is discontinued. Then I tried some Breaker sites and No Luck. Someone has one. Still Looking, Thanks
That is the connector I need at 1 end, with a L1450 Male to go in the Generator, and would prefer made up cords instead of parts. Will if I have too. Better protected from water. Thanks again.