Hi I am ssaha, I want to ask, how can I calculate maximum demand load from connected load? Suppose in a shopping complex cannected load is 5000 KW. Only connected load is known but other component like demand factor not specified. In that case how can I calculate maximum demand load? Please help me.

You need to calculate the total loads that will be on at one time.

If your located in USA, or for reference, you can begin reviewing Article 220 of the
NFPA 70: National Electrical Code® (http://www.nfpa.org/aboutthecodes/AboutTheCodes.asp?DocNum=70&cookie_test=1)

Table 220.3(A), which lists watts per square foot for general lighting in various types of facilities, may help.

Since you already have connected load, you already have the actual total lighting load. Heating and cooling load can be added, making assumptions of what will be total load based on need of either.Next add large intermittent loads, such as elevators, trash compactors, dishwasher booster heaters.

Generally, another way of thinking, is to add all continuous loads, and then add a judgment of non-continuous loads. Your total connected load will have these continuous loads, and you need to add what the total non-continuous loads will be.

Don't forget to consider exterior lighting and signage only used at night.

Here are a few references to get you started:
http://www.nfpa.org/assets/files/PDF/necdigest/CodeIssues072704.pdf

Demand load - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Demand_load)

Commercial Load Calculations (http://ecmweb.com/mag/electric_commercial_load_calculations/)

Kw/.85

I want to know what is total connected load for 3 phase commertial consumer. Lt ii(c)
Service rovider reliance energy , mumbai maharashtra

max. demand is 31.18 kva,
Connected demand-50 kva
Units consumed- 5931
Bill amount- rs 88109.15
Billing demand is 20.27kva 65% of max demand during 6 - 22 hrs

Demand fix charge- rs 3040.05
Energy charge rs75169.90
Energy charged rs 10.91/unit


Email- [email protected]