PDA

View Full Version : Toilet Flex Line with brass fittings at both ends


hgstephens
Jun 29, 2009, 08:39 AM
My upstairs toilet flex line split at the plastic/nylon fitting underneath the toilet. We were out of town and the water ran for about four days. After three months of repairs to the house, I want to replace with flex lines that have brass fittings at both ends. I looked all over the internet and all the flex lines have the plastic/nylon fittings where they connect to the toilet.

Are flex lines with brass fittings at both ends available?

Thanks for your reply

speedball1
Jun 29, 2009, 11:40 AM
You're the best example of why I preach; The cheapest insurance you'll ever get is shutting off the water to the house when you leave on vacation.


Are flex lines with brass fittings at both ends available?
I ncouldn't locate one with brass fittings on both ends. However Ace Hardware has a supply,(see image) that will shut off the nwawter in case of a break. Checj them out at;
FLOODSAFE TOILET CONNECTOR Automatically shuts off the MFSST20-814W WATTS (http://www.acehardwaresuperstore.com/floodsafe-toilet-connector-automatically-shuts-off-the-p-75516.html?ref=42)
Good luck, tom