PDA

View Full Version : State Select Hot Water Heater


peggy_collins
Oct 10, 2006, 04:36 AM
How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool.

Thank you.:)

speedball1
Oct 10, 2006, 05:10 AM
How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool.

Thank you.:)
Hi Peggy,

On the front of your heater you will find two inspection plates. Open up the bottom one and you will see a thermostat. The factory setting's 120, I keep mine at 110, that way I don't have to temper the hot water with cold. If the water suddenly became too cool I would have the elements checked. If one burned out you would have the symptoms you describe. Good luck, Tom

peggy_collins
Oct 10, 2006, 10:29 AM
Hi Peggy,

On the front of your heater you will find two inspection plates. Open up the bottom one and you will see a thermostat. The factory setting's 120, I keep mine at 110, that way I don't have to temper the hot water with cold. If the water suddenly became too cool I would have the elements checked. If one burned out you would have the symptoms you describe. Good luck, Tom


Thanks so much, Tom, I will try it and let you know what happens. It is a relatively new water heater so I'm hoping the elements are OK.

Peggy

tnellbog
Sep 14, 2007, 06:29 PM
It's not lengthy.. water heater has just quit working. Only 3 years old.. what's up?

stew_1962
Sep 14, 2007, 06:46 PM
State Industries | Residential | Gas Water Heaters (http://www.statewaterheaters.com/prod/res-gas.html)