Hi!
My Whirlpool Senseon Dryer has an e-1 code and shuts off before clothes are dry. Can you help?
Thanks

I'm stealing from some other help sites:

Whirlpool Senseon gives E1 error code - Appliance Repair Forum (http://forum.appliancepartspros.com/dryer-repair/5721-whirlpool-senseon-gives-e1-error-code.html)

The "E1" error code means the thermistor (#42 on the bulkhead parts break down diagram) is open and has to be replaced.

- The part number for the thermistor is AP3919451

Breakdown of one model of Whirlpool Senseon Dryer (http://www.appliancepartspros.com/partsearch/model.aspx?diagram_id=112974&&model_id=264261)

And here is another answer:

Whirlpool Senseon Dryer - The Laundry Appliance Repair Forum - Do-It-Yourself Appliance Repair Help - ApplianceGuru.com: The Samurai Appliance Repair Forums (http://applianceguru.com/forum2/502.html)

"E-1 is an open thermistor, not a hard thing to replace, I believe on your model it is located behind the rear panel on the blower housing."