tandjkururangi
Jun 3, 2009, 08:02 PM
My machine will spin for 60 seconds than stops.
If I take out the load and leave 4 light bits of clothing in it will spin for a while throw all the clothing to one side and stop.
If I take all the clothing out it will spin but not fast.
Flying Blue Eagle
Jun 5, 2009, 09:27 PM
Tandjkururangi - HERE IS SOME OF THE PROBLEMS<THAT CAUSE THIS TROUBLE!!
#1- YOU could have a drive belt that is loose and slipping ,#1A- There should be no more then 3/4" play in the belt when adjusted right{note - the 3/4" is in the middle between the motor and the pully;; #2 YOU MAY HAVE A SPIN SOLENIOD GOING OUT :: #3- THE LID Safety SWITCH IS OUT OF ADJUSTMENT OR DEFECTIVE:: TIMER IS DEFECTIVE :: TOP TEST THESE ITEMS YOU WILL NEED A { VOLT-OHM ] meter to do it with, if you don't have one ,you can get one from a hardware store , Lowe's <HOME DEPOT< ELECTRICAL SUPPLY STORE : THAT IS IF YOU WANT TO DO THE TESTING OR NOT :IF NOT CALL A APPLIANCE SERVICE MAN AND LET HIM DO IT :: IF -YOU DECIDE TO DO IT COME back on this post and let me know and I will lead you threw it steop by step;; Have a great day and GOD BLESS ;;F.B.E.