PDA

View Full Version : Turning my tub around


decisis_34
May 29, 2009, 08:55 AM
I am redoing the tile in my bathroom and would like to move the bath tub around to where the drain is on the other end. So my question is can I run from the waste and overflow assembly to the pipe that's in the ground on the other side of the tub by running underneath the tub?

speedball1
May 29, 2009, 09:34 AM
I am redoing the tile in my bathroom and would like to move the bath tub around to where the drain is on the other end. So my question is can i run from the waste and overflow assembly to the pipe that's in the ground on the other side of the tub by running underneath the tub?

Are you replacing a left hand tib with a right hand one or visa-versa because you just can't pull the tub and reverse it. Regards, Tom

decisis_34
May 29, 2009, 09:44 AM
I was planning on putting a new tub in. The tub I have now is a right hand drain tub and I wanted to replace with a left hand drain tub or a drop in tub. The reason I wanted to do this is because I wanted to get rid of the wall that has the water pipes coming in from the attic and place them on the wall on the opposite side.

speedball1
May 29, 2009, 09:53 AM
is can I run from the waste and overflow assembly to the pipe that's in the ground on the other side of the tub by running underneath the tub
Since the tub waste connects beneath the floor line were you planing on platforming the tub? Cheers, Tom

decisis_34
May 29, 2009, 09:57 AM
Yes, after the overflow assembly I hoping that I will be able to run a pvc pipe right under the tub to the pipe that is already in the ground.