Hi guys

The Intertherm wall furnace No heat at all. I cannot get 24 vac from the fast thermostat inside the unit and the unit is dead nothing happening at all . I would think the culprit is the fast thermostat . I checked out the relay , the relay cannot get 24vac on the coil to get energized . The other side of the relay I get 120 vac on the spade terminals . Found out that the relay was OK however cannot be energized at all.
You comments will be appreciated

Have you checked for n24volts of power coming out of the transformer?

have you checked for n24volts of power coming out of the transformer?

Yes I did there is 24 vac out of the transformer . Tks