thunderwolf_37
May 17, 2009, 10:01 AM
I am wanting to replace my old Honeywell Chromotherm III to a Hunter Set & Save 44260.
The wiring from the old is: W-white, G-green, C-blue, R-red, Y-yellow and orange is not connected (O,W,G,C,R,Rc,B,Y).
My new one is labeled G,RC,RH,Y/O,W/B & Y1 with RC & RH jumped.
I have gone through most of the post and did not see one that helped or I just didn't read all the way through :p.
I have separate units, ouside electric AC and gas heater in the attic if this helps or not
Anyone out there that can help it will be VERY much appreciated
The wiring from the old is: W-white, G-green, C-blue, R-red, Y-yellow and orange is not connected (O,W,G,C,R,Rc,B,Y).
My new one is labeled G,RC,RH,Y/O,W/B & Y1 with RC & RH jumped.
I have gone through most of the post and did not see one that helped or I just didn't read all the way through :p.
I have separate units, ouside electric AC and gas heater in the attic if this helps or not
Anyone out there that can help it will be VERY much appreciated