Water flows fine, but, when I turn on my shower from the (delta) tub by lifting the little lever up. This really Loud whistle comes from the tub?? /HELP

water flows fine, but, when i turn on my shower from the (delta) tub by lifting the little lever up. This really Loud whistle comes from the tub??????/HELP

I'm assuming the "little lever" is on a spout. I'm going to put up two diverter spouts. One is a Delta spoutand the other a regular slip on spout. Which one do you have? The Delta spout's on the left. Back to you, Tom

I'm assuming the "little lever" is on a spout. I'm gonna put up two diverter spouts. One is a Delta spoutand the other a regular slip on spout. Which one do you have? The Delta spout's on the left. Back to you, Tom

It's a delta select looks more like the one on the right, but, the pull lever is about one inch from the wall.. They are about 5 years old...

Rmnn,
You didn't need to repost the same question twice. Look under your spout next to the wall if you see any type of opening youhave a slip on spout. If not then your spout screws on. Let me know what you have. Regards, Tom

Rmnn,
You didn't need to repost the same question twice. Look under your spout next to the wall if you see any type of opening youhave a slip on spout. If not then your spout screws on. Let me know what you have. Regards, Tom


Sorry just worried... I didn't see anything, I caulked in between the tile and the spout. Do I need to remove the caulk. Because, when they put it on, there was a 1/2 inch gap between the wall and the spout.

If you don't have a small opening on the bottom then it'smy guess you have a screw on spout that has a nipple that's 1/2" inch too long. Unscrew it and soak the spout in vinegar or bleach. When it comes time to put it back I'll be advising you to replace the nipple with a brass nipple 1/2" shorter. Good luck