PDA

View Full Version : Condenser Unit/Thermostat Wiring


Bohica
May 8, 2009, 02:36 PM
Ok, so my dog chewed up my thermostat wiring to my condenser and I can't figure out how to wire it back up. I went to the local HD and bought more wire and came home thinking I would just splice it and be done. Well, it turned out not to be that straight forward. The thermostat wire is has two wires a red and a white. I went out to splice it and hook it up and noticed that there is only one wire coming out of the condenser, a yellow one. How the heck was this wired previously? Is only one of them supposed to be hooked up to it?

Thanks for you help

Bohica
May 8, 2009, 02:46 PM
Sorry, meant to put this at the bottom and forgot.

Air Conditioning Unit (outdoor condenser)
Armstrong
Appx. 15 yrs old
Model#: SB30SA-4D

Joshdta
May 8, 2009, 07:34 PM
Take the door off the unit. Look at the contactor this is where the yellow wires should be going.

http://yueqing-shi-shinaidi-electrical.tradenote.net/images/users/000/102/716/products_images/283101.jpg

One wire must have come lose. You can hook either red or white to either one. Make sure to turn the breaker off.

Bohica
May 8, 2009, 09:20 PM
I feel pretty stupid now, one of the wires broke off up in the unit. I temporarily reconnected the wires and it works now. I'll rewire permanently tomorrow.

Thanks for your help!

Joshdta
May 9, 2009, 05:30 AM
Good you found it. Glad it works. Have a great weekend.