I have a 79 low profile toilet and can't find a flapper ball large enough to stop the flow.
Any ideas?
The model is K 3385 or 3685

I have a 79 low profile toilet and can't find a flapper ball large enough to stop the flow.
Any ideas?
The model is K 3385 or 3685

Your post left a lot of questions unanswered . Champlain isn't the brand of toilet that you have and the model numbers don't match up. Here are the new and the old Kohler Chanplain toilets,(see images) as you can see they don't take a flapper but a flush ball. Check them out at ; PlumbingSupply.com - Champlain Toilet Repair Parts By Kohler (http://www.plumbingsupply.com/kohlertoiletparts-champlain.html)
Let me know if this is the wrong toilet and if it is please send me better information so I can research it farther.l Good luck, Topm

Your post left a lot of questions unanswered . Champlain isn't the brand of toilet that you have and the model numbers don't match up. Here are the new and the old Kohler Chanplain toilets,(see images) as you can see they dont take a flapper but a flush ball. Check them out at ; PlumbingSupply.com - Champlain Toilet Repair Parts By Kohler (http://www.plumbingsupply.com/kohlertoiletparts-champlain.html)
Let me know if this is the wrong toilet and if it is please send me better information so I can research it farther.l Good luck, Topm

That is what is stamped inside the tank. Maybe when I bought new guts they are different.
You are correct it is a ball, but the new one is too small. The one on the left is correct.
I guess I need to remove 51344 arm to remove the rod that holds the ball and put a longer rod on it.K30668 KOHLER ROCHELLE/POMPTON K9235/K9242 Detail Page (http://www.dinapoli.com/ProductDetail.jsp?LISTID=1C1B0000-1101571206)


BTW it has a square front

That's just the bowl design.
If you had a longer lift wire would the flush ball seat? Let me know, Tom

It might help if I can get the wire off.
Thanks

It might help if I can get the wire off.
Thanks

The lift wire has threads that screw into the flush ball. You simply unscrew it

Maybe when I bought new guts they are different..
You didn't get a exact replacement? What parts did you change? Regards, Tom

K30668 KOHLER ROCHELLE/POMPTON K9235/K9242 Detail Page (http://www.dinapoli.com/ProductDetail.jsp?LISTID=1C1B0000-1101571206)

My lever is on the side not the front

I'll check in the morning and see if I can pull up the exact cutaway. Good night, I'm kicking back! Tom

Hey Sam, I've located data on your K-3385 Toilet, click on : Kohler Plumbing (http://www.kohlerserviceparts.kohler.com/Product.aspx?ModelID=8f61b511b77b4d9eb901d768dea59 527&AttributeIDs=&PageNum=2&SortBy=0)
However to download the specs I nned to install Adobe Flash and my computer won't allow me to. Over to the right of the sheet are the specs. Can you down load the flush valve specs and get back to me? Regards, Tom

Thanks Tom
I have already rated you as good. Thanks for all your efforts. I am using a plumber.