The lid switch on my kenmore washing machine is just hanging... the connections are completely broken off.. hence, my machine is no longer working.
My question is, how do I get to the switch to replace it? I have stood upside down and cannot figure out how to access it.
Please help, laundry is piling up!::

REGGIE504 - TAKE a strong putty knife and or a common screw driver and push it in the oppening between the washer top and the side panels on the front corners about 2" I n from the, FRONT CORNERS AND RAISE THE TOP UP :: TO replace the switch- YOU Will have to remove the two screws that MOUNTS IT TO THE FRONT PANEL,THEN {PUSHSWITCH OUT Through THE MOUNTING HOLE {ON SOME MODLES YOU MAY HAVE TO DEPRESS)SPRING CLIPS MAY BE <THE ::
TAKE THE OLD ONE WITH YOU WHEN YOU GO TO MATCH : NOTE -GET A SHARP PENCIL AND MARK AROUND THE OLD SWITCH <BEFGORE REMOVEING THE SWITCH> SO TO GET IT BACK RIGHT:: HAVE A GREAT DAY AND GOD BLESS ::F.B.E.