Need to change the Low Beam bulb. (Side by side with the High Beam bulb)

I can see that the assembly requires a counter clockwise rotation, but the limited space (driver's side) prevents me from doing so.

Advice would be appreciated.

I'm not exactly sure how it is on a 2000 Accord, but many Hondas require you to remove the front turn signal/parking light, three 10mm mounting bolts and nuts, then pull out the headlight, disconnect the 3-P connector from it, pull the retaining spring away from the bulb and remove the bulb. It's best not to get your body oil on the new bulb.

Cannot suggest way to solve the problem

I need to know how to change headlights for honda accord 2000

To Change a headlight on a 2000 Accord: You pull out the radiator coolant reservoir, it just slides up and the hose stays intact connected to the radiator. Then there is a black plastic spacer with 2 plastic plugs in. Pop them off with a screwdriver. Then pinch the electrical socket around the bulb and pull it off. Turn the bulb counter clockwise to remove. Replace the bulb and be sure to hold the bulb with a cloth so the oil from your skin does not get on it and shorten its life.

You need to remove the air cleaner case & element , then remove the air intake on the throtle body air intake, then there is a black plastic shield over the low beam section the 2 fasteners on top are removed then lift and remove, then remove wire harness , watch that you have depressed the clip to remove... then remove light counter clockwise, then reverse to reinstall everything... you only remove overflow tank for the high beam & you don't need to remove battery (3.0 V6)