PDA

View Full Version : Replacement Sink Drain Pipe to Trap Do Not Line Up


jpk1154
Feb 14, 2009, 10:15 AM
I am preparing to replace my bathroom sink. If the new sink drain pipe and the trap below do not line up is there a flexible connector that will allow the connection to be made without installing new pvc piping below?

massplumber2008
Feb 14, 2009, 03:45 PM
Hi JPK:

They do make a flexible tailpiece... see picture below. They also make a flexible ptrap... just FYI. These are available at all home improvement stores.

You will want to purchase the 1.25" tailpiece and may also need to purchase an 1.5" x 1.25" nut and washer.

Good luck...

MARK