I'm in the process of changing out a G60RBG-3 for an S8610U Universal Intermittent Pilot Module. What is the correct location for the wires? Make: Bryant Model: 585JJ030075 Gas furnace.

If that is a hot surface ignition module all you have to do is make sure the wire is out of the way of the flames after the furnace is able to ignite.

Post a clear picture of the old and new module if you can. If the boards are compatible, it should show in the wiring diagram of the new one exactly how to wire it. But if you want help, I will try. The new module is a honeywell yes?

Rail, I believe they are changing the actuall ignition control, not just the igniter.

Let me know if I missed something, more info will always help.

Pics will help more than anything for me. Clears pics of the terminal markings would be great. I'm assuming you have something like this on the honeywell>>mv, pv, mv/pv, com, spark(or hsi), 24v ground, 24v, Maybe even a th. Let me know more.

I attempted to send some pictures, but it appears the files were too large. I think I have it figured out, anyway, though. If I'm wrong, I'll get back to you. Thanks for your help.

Please let us know how things work out, either way. Always glad to hear of succes. Good luck