Hi,
Is it possible to connect an dvd to an old TV?
The TV only has an Ant. Input (coax)

I also have a vrc. I tried to set that up. Coax cable from ANT. Out to ANT In on the TV.
Tried to tune the channels to find anything, but without success.
Maybe it just won't work on my TV?

The TV works with turn-buttons, maybe I do something wrong for searching the channels.
It can also setup only 12 channels and its like impossible to see which channels it's on.

I hope somebody can help, it's for a school project.

Grtz

You have to use RCA cables from the DVD out to the VCR in, plus the coax from the VCR to the TV.

You have to select input (on some it is an input button on remote and some a channel usually beteeen the highest channel and channel 2). The TV needs to be on channel 3 (in some areas they may use Ch 4).

I just figure it out.
After a long search. I needed tot set the TV to the U channel an set the frequentie on 75 UHF.
I jused the vcr player as rf modulator and now can see dvd.

Thanks greets, I'm happy now