I have a GE Dryer MN DBXR453GA2WW That squeaks

I need to know how to remove the front of the dryer for servicing.

Thanks

Look on right side for various pictures.

Part Advantage :: Category Search (http://www.partadvantage.com/store/categories/ge/DBXR453GA2WW)

Usually you pop the top between the top and front panel. There are clips there that you can push in with a wide knife or thin putty knife. Then usually two 5/16th screws one on each side at top of front panel and tip out and pull up unless you also have two screws exposed at the bottom of the front panel. If that is the case remove them also.