View Full Version : Ps2 not working
bigbadd
Aug 7, 2006, 05:42 AM
Hi all
Could someone tell me the answer of what I can do here?
When me ps2 was still under warranty... I had a problem with "not reading disks" error. I sent the console out for repair and when it returned... things worked fine.
Now, the games will not work again! No error comes up at all this time and I'm finding there is a constant clicking noise coming from it. It constantly reads "reading disk" but nothing happens.
What can I do thanks
worthbeads
Aug 7, 2006, 10:53 AM
Perhaps the disks are dirty or damaged?
bigbadd
Aug 7, 2006, 12:15 PM
No disks are not scratched or dirty it's the console itself... I was wondering if anyone has had this problem and how to fix. Thanks
worthbeads
Aug 7, 2006, 04:10 PM
Maybe the lens is dirty. This can be resolved with a lens cleaning disk. The disk is an ordinary disk except it has cleaning brushes on it.
czerno
Aug 8, 2006, 01:51 PM
Lots of problems like this go to the playstation boards and some people do have good advice how to fix it. http://boardsus.playstation.com/playstation/board?board.id=psx2 hope it helps.
binx44
Sep 14, 2006, 03:52 AM
I'm having the same problems and I've been told its because if you play movies on your ps2 it screws up the laser.. have you played any dvds on it
Hessian Horseman
Nov 14, 2006, 08:03 AM
I had the same problem an I took mine apart and cleaned the lense with a q-tip an some alcohol. It works good now but the lense still needs cleaning every so often.
bigbadd
Nov 14, 2006, 02:16 PM
Thanks all for your help ps2 is working now... had a friend of mine replace lense... I have the model where there was a recall on a power cable (possible fire hazzard). Anyway started thinking the cable was fring the laser?? Don't know
Anyway thanks.
TOOLBAND12
Dec 19, 2006, 09:32 AM
hi all
could someone tell me the answer of what i can do here?
when me ps2 was still under warranty..... i had a problem with "not reading disks" error. I sent the console out for repair and when it returned.... things worked fine.
Now, the games will not work again! No error comes up at all this time and im finding there is a constant clicking noise coming from it. It constantly reads "reading disk" but nothing happens.
What can i do thanks
You probably need to adjust the height of the lens inside your ps2.
I did to mine and never happened again.
There is lots of websites on the web that show you step by step how to fix this problem...
therick
Mar 31, 2007, 08:18 AM
Try blowing it out, the PS2 Mini gets dusty real fast.
JeanS
May 14, 2007, 09:38 AM
Hello, A friend of mine had the same problem but we were able to fix it using the help of a great tech support site that help you deal with these errors.
Here is the page for PS2 Support (http://www.fixya.com/support/p201364-sony_playstation_2_console)
Good luck
t-mac
Nov 6, 2007, 03:33 PM
i had the same problem an i took mine apart and cleaned the lense with a q-tip an some alchohol. it works good now but the lense still needs cleaning every so often.
How did you open the system didn't it break because your not meant to open it plus did it really work because I have the same problem
billabong
Dec 20, 2007, 01:47 PM
I've had that problem it's the spinny thing inside its jammed u have to get it dejammed at the repair store they should be able to dejam it
Shaydee
Dec 1, 2010, 02:07 AM
Hey my one is nt starting... once I reset the PS2 , the power light will go green after sometime, it starts blinking red... How do I fix this problem..?