I purchased this truck knowing it needed 2 injectors. I installed new inkectors, (and yes got oil out of cylinders) installed new valve cove gaskets, new wiring harness, new batteries. Truck started and then died. Changed out fuel pump, filter, and it fired up and ideled for 15 minutes. I started to take for a drive and made it 250yards. Had truck towed to repair shop. He had truck for almost 3 weeks and said battery cables lose on ground. Truck ran, like crap but ran. He put on scan tool and found no codes, no history of codes, and found number 7 injector bad, starter draging. He says it wasn't turning motor fast enough to get oil pressure up to open injectors. Installed new injector, new starter, cked all conectons... NO START! Replaced camshaft sensor w new one(old one wasn't even dirty) put batts on charger over night. Truck ran about 1 mile and had to tow it home. I'm out of ideas, and people to ask. Any ideas on what and how to test. Remember it won't start, it cranks no start. I even tried kicking the tire... it didn't help. Thanks:confused:

See if this link gives you some ideas:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-8.html#post1415281

You might enjoy looking at Product Performance/Turbochargers:

http://www.mobiloil.com/USA-English/MotorOil/Videos/TV.aspx