Hello,

I have a modular home with a Miller furnace, Becket motor, up until 2 days ago I have not had any problems with it. Then I woke up cold. The light on the module was flashing, I pressed reset and nothing, I bled the line (took about 2-3 seconds) Kero started flowing so I closed it and the furnace fired and worked. Everything was good, worked for 48 hours and then it happened again. I have a top feed tank that is new and I have almost a fuel tank of Kero in it. Any help is appreciated.

Check out the lines from tank to furnace, sounds like maybe a leak somewhere and air is getting into the lines