Throttle1982
Jan 12, 2009, 07:07 PM
I've got a 1998 Jeep Cherokee with a pretty bad front driveshaft vibration.
When I remove the front driveshfat from the vehicle and do 60mph it doesn't vibrate. When the driveshaft is installed it vibrates.
I've replaced the U-joints in it, and even tried rotating the front axle for a better pinion angle (vehicle is slightly lifted) No change.
I've even gone to the wrecker to pick up a new shaft in case mine was bent, and no luck. Shaft continues to vibrate... I'm at a loss at what could be causing this.
When I remove the front driveshfat from the vehicle and do 60mph it doesn't vibrate. When the driveshaft is installed it vibrates.
I've replaced the U-joints in it, and even tried rotating the front axle for a better pinion angle (vehicle is slightly lifted) No change.
I've even gone to the wrecker to pick up a new shaft in case mine was bent, and no luck. Shaft continues to vibrate... I'm at a loss at what could be causing this.